Active PFC Function, >0.95 (230Vac), >0.99 (115Vac)
Low Leakage Current, <250uA
Four M3 Mounting Holes Optional on Bottom Side
Remote ON/OFF Control EN55022 Class B Meets
Class I and Class II Construction Continuous Short Circuit Protection with Hiccup Mode and Auto Recover
Safety approval by CE, CB and UL
download SPC.
Specification
1.All specifications valid at nominal input voltage,full load and +25°C after warm-up time unless otherwise stated. 2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
Input Specification
Characteristics
Conditions
Voltage Range
AC IN
90 ~ 264 VAC
AC IN
120 ~ 370 VDC
Frequency
47 ~ 63 Hz
Output Specification
Characteristics
Conditions
Output Power
100 Watt (max.)
Voltage Accuracy (Full Load and Nominal Vin)
Single:
±2%
Minimum Load (at Full Load)
3%
Line Regulation (5% to at Full Load)
Single:
±1%
(typ.)
Load Regulation (5% to at Full Load)
Single:
±1%
(typ.)
Ripple (20MHz bandwidth)
12S:120mV (Vp-p) 15S:150mV (Vp-p)
(max.)
24S:200mV (Vp-p) 48S:240mV (Vp-p)
Noise (20MHz bandwidth)
12S:120mV (Vp-p) 15S:150mV (Vp-p)
(max.)
24S:200mV (Vp-p) 48S:240mV (Vp-p)
Temperature Coefficient
±0.03% / °C ( 0 °C~50 °C ) (max.)
Short Circuit Protection
Auto recovery, Hiccup mode
General Specification
Characteristics
Conditions
Switching Frequency
100K ~ 133K Hz (typ.)
Isolation Voltage (Input to Output)
3000 VAC (min.)
Operating Temperature
-25 °C to +70°C (with derating)
Storage Temperature
-25°C to +85°C
Humidity
95% RH (max.)
Cooling
Free air convection
Physical Specification
Characteristics
Conditions
Dimension (Tolerance ±0.5)
109.0 x 58.5 x 30.0 mm
4.3 x 2.3 x 1.18 inches
Weight
310 g
Case Material
Plastic resin with Fiberglass (flammability to UL 94V-0)
發郵件給我們：
